{"product_id":"silencer-chainstay-protector-edit-filter","title":"Silencer Chainstay Protector - Edit \u0026 Filter","description":"\u003c!-- Start of Description --\u003e\n\u003ch5\u003eA dedicated chainstay protector kit for the 2024 Airdrop Edit MX, Edit 27.5 and Filter MX.\u003c\/h5\u003e\n\u003cp\u003eWe put a lot of emphasis on building bikes that are quiet to ride; it's an often overlooked feature that can make a real difference to the experience. But until now, we haven't found the perfect solution for chainstay protection. An old bit of inner tube, velcroed-on neoprene, or mastic tape... they all work, but they're not exactly dialled. We wanted to do better.\u003c\/p\u003e\n\u003cp\u003eThat's where the new Silencer Chainstay Protector comes in. Designed from the ground up to work perfectly on the Edit MX, Edit 27.5 and Filter MX, it's a one-piece, injection-moulded TPE rubber protector. We've shaped it with sound-damping ridges on the top, protection from heel-scuff on the side, and it even covers the weld area on the chainstay yoke. Pre-applied adhesive on the entire inside surface keeps it in place. There's a subtle Airdrop logo embossed on the side and we've even specced the perfect surface texture. It's pre-tensioned to wrap around the tube, so the material memory forces it to stay wrapped, not try to peel off.\u003c\/p\u003e\n\u003cp\u003eAll new Edit MX, Edit 27.5 and Filter MX bikes and frames come with a Silencer included. We've also made it available as an aftermarket kit which includes a self-adhesive silicon patch to use on the seatstay and an isopropyl wipe to clean your frame before application.\u003c\/p\u003e\n\n\u003c!-- End of Description --\u003e\n\n\u003c!-- Start of Key Features --\u003e\n\u003ch6\u003eFeatures\u003c\/h6\u003e\n\u003cul\u003e\n\t\u003cli\u003eKeeps your bike running quietly\u003c\/li\u003e\n\t\u003cli\u003ePrevents chain-slap damage to the chainstay\u003c\/li\u003e\n\t\u003cli\u003ePrevents heel-scuff damage to the chainstay\u003c\/li\u003e\n\t\u003cli\u003eInjection moulded TPE rubber\u003c\/li\u003e\n\t\u003cli\u003ePre-applied adhesive\u003c\/li\u003e\n\t\u003cli\u003eEasy to install\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\u003c!-- End of Key Features --\u003e\n\n\u003c!-- Start of What's Included --\u003e\n\u003ch6\u003eWhat's Included\u003c\/h6\u003e\n\u003cul\u003e\n\t\u003cli\u003eInjection moulded chainstay protector\u003c\/li\u003e\n\t\u003cli\u003ePre-applied adhesive pads for chainstay protector\u003c\/li\u003e\n\t\u003cli\u003eSelf-adhesive seatstay protection patch\u003c\/li\u003e\n\t\u003cli\u003eIsopropyl Cleaning Wipe\u003c\/li\u003e\n\t\u003cli\u003eFitting Instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- End of What's Included --\u003e\n\n\u003c!-- Start of Compatibility --\u003e\n\u003ch6\u003eCompatibility\u003c\/h6\u003e\n\u003ctable style=\"width:100%\"\u003e\n\t\u003ctbody\u003e\n\t\t\u003ctr\u003e\n\t\t\t\u003ctd style=\"width: 20%; text-align: left;\"\u003e\u003cstrong\u003eFilter MX\u003c\/strong\u003e\u003c\/td\u003e\n\t\t\t\u003ctd style=\"width: 80%; text-align: left;\"\u003eThe Silencer is designed specifically to fit the 2025 Filter MX frames. One size fits both the 433mm (S1, S2) and the 438mm (S3, S4) chainstays.\u003c\/td\u003e\n\t\t\u003c\/tr\u003e\n\t\t\u003ctr\u003e\n\t\t\t\u003ctd style=\"width: 20%; text-align: left;\"\u003e\u003cstrong\u003eEdit MX \/ 27.5\u003c\/strong\u003e\u003c\/td\u003e\n\t\t\t\u003ctd style=\"width: 80%; text-align: left;\"\u003eThe Silencer is designed specifically to fit the 2024 Edit MX and Edit 27.5 frames. One size fits both the 433mm (S1, S2) and the 438mm (S3, S4) chainstays.\u003c\/td\u003e\n\t\t\u003c\/tr\u003e\n\t\t\u003ctr\u003e\n\t\t\t\u003ctd style=\"width: 20%; text-align: left;\"\u003e\u003cstrong\u003eEdit v3 \/ v4\u003c\/strong\u003e\u003c\/td\u003e\n\t\t\t\u003ctd style=\"width: 80%; text-align: left;\"\u003eThe Silencer is not designed specifically to fit the Edit v3 \/ v4 chainstays. It will fit, but not perfectly. The 435mm chainstay is a little narrower with more taper towards the dropout, meaning the Silencer must be wrapped tighter near the pivot. The location of the rearward cable boss can vary by size, so it may not line up perfectly with the hole and a small modification may be required.\u003c\/td\u003e\n\t\t\u003c\/tr\u003e\n\t\t\u003ctr\u003e\n\t\t\t\u003ctd style=\"width: 20%; text-align: left;\"\u003e\u003cstrong\u003eEdit v1 \/ v2\u003c\/strong\u003e\u003c\/td\u003e\n\t\t\t\u003ctd style=\"width: 80%; text-align: left;\"\u003eThe Silencer is not designed specifically to fit the Edit v1 \/ v2 chainstays. It will fit, but not perfectly. The non-boost rear end means the chainstay has a less prounounced bend, but the Silencer is flexible enough to cope. The 435mm chainstay is a little narrower with more taper towards the dropout, meaning the Silencer must be wrapped tighter near the pivot. The location of the rearward cable boss can vary by size, so it may not line up perfectly with the hole and a small modification may be required.\u003c\/td\u003e\n\t\t\u003c\/tr\u003e\n\t\t\u003ctr\u003e\n\t\t\t\u003ctd style=\"width: 20%; text-align: left;\"\u003e\u003cstrong\u003eFilter v1\u003c\/strong\u003e\u003c\/td\u003e\n\t\t\t\u003ctd style=\"width: 80%; text-align: left;\"\u003eThe Silencer is not designed specifically to fit the Filter chainstays. It will fit, but not perfectly. The Filter's chainstay is shorter at 430mm, meaning the Silencer may need to be trimmed. The chainstay is also a little narrower with more taper towards the dropout, meaning the Silencer must be wrapped tighter near the pivot. The location of the rearward cable boss can vary by size, so it may not line up perfectly with the hole and a small modification may be required.\u003c\/td\u003e\n\t\t\u003c\/tr\u003e\n\t\t\u003ctr\u003e\n\t\t\t\u003ctd style=\"width: 20%; text-align: left;\"\u003e\u003cstrong\u003eBitmap\u003c\/strong\u003e\u003c\/td\u003e\n\t\t\t\u003ctd style=\"width: 80%; text-align: left;\"\u003eNot compatible.\u003c\/td\u003e\n\t\t\u003c\/tr\u003e\n\t\t\u003ctr\u003e\n\t\t\t\u003ctd style=\"width: 20%; text-align: left;\"\u003e\u003cstrong\u003eFade\u003c\/strong\u003e\u003c\/td\u003e\n\t\t\t\u003ctd style=\"width: 80%; text-align: left;\"\u003eNot compatible.\u003c\/td\u003e\n\t\t\u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003c!-- End of Compatibility --\u003e\n\n\u003c!-- Start of Instructions --\u003e\n\u003ch6\u003eInstructions\u003c\/h6\u003e\n\u003cp\u003eA printed set of installation instructions will be included in your Silencer kit. But you can also \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0777\/4197\/files\/Silencer_Chainstay_Protector_Instructions.pdf\" target=\"_blank\" title=\"Airdrop Silencer Chainsaty Protector Kit Instructions\" rel=\"noopener noreferrer\"\u003edownload a PDF version of the instructions here\u003c\/a\u003e.\u003c\/p\u003e\n\u003c!-- End of Instructions --\u003e\n","brand":"Airdrop Bikes","offers":[{"title":"Default Title","offer_id":47793034789186,"sku":"SILENCER-EDIT","price":104.0,"currency_code":"RON","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/4197\/files\/1800-Silencer-Edit-01.jpg?v=1707915605","url":"https:\/\/www.airdropbikes.com\/en-ro\/products\/silencer-chainstay-protector-edit-filter","provider":"Airdrop Bikes Limited","version":"1.0","type":"link"}