30% off DJ wheels with a Fade frame! use code BANK30OFF

0

Your Cart is Empty

Edit v1 Assembly

Airdrop Edit v2 Assembly

Please Note: The original Edit v1 pivot hardware made use of SUS-303 Stainless Steel for much of the pivot hardware. Although hard wearing, this proved to be heavy and so was subsequently replaced with alloy hardware of the same specification when we released the Edit v2. The pivot hardware kits on this page are therefore linked to the later, lighter Edit v2 kits.

&nbsp

# Component Specification Quantity Spare Part Kit
1 Rocker pivot bolt M6x1.0x16mm 2 Rocker Pivot Kit
2 Rocker pivot cover 27x6.2x4.0mm 2
3 Rocker pivot axle 12xM6x68.0mm 1
4 BB pivot bolt M6x1.0x16mm 2 BB Pivot Kit
5 BB pivot cover 27x6.2x4.0mm 2
6 BB pivot washer 20x12.2x3.0mm 2
7 BB pivot axle 12xM6x66.5mm 1
8 Chainstay pivot bolt M8x26mm 2 Chainstay Pivot Kit
9 Chainstay pivot washer (outer) 22x8.2x3.0mm 2
10 Chainstay pivot washer (inner) 15x8.2x3.0mm 2
11 Seatstay pivot bolt M8x28mm 2 Seatstay pivot kit
12 Seatstay pivot washer (outer) 22x8.2x3.0mm 2
13 Seatstay pivot washer (inner) 15x8.2x4.0mm 2
14 Shock mount bolt & washer (upper) M8x1.25x40mm 1 Shock Bolt Kit
15 Shock mount nut (upper) M8x1.25 1
16 Shock mount bolt & washer (lower) M8x1.25x40mm 1
17 Shock mount nut M8x1.25 1
18 Rocker arm (right) 1 Rocker Arm Kit
19 Rocker arm (left) 1
20 Dropout bolt M8x1.25x16mm 4 Dropout Bolt Kit
21 Mech Hanger Dropout 1 Mech Hanger Dropout
22 Brake Mount Dropout 1 Brake Mount Dropout
A Rocker pivot bearing 6001 2 Bearing Kit
B BB pivot bearing 6001 2
C Chainstay pivot bearing 608 2
D Seatstay pivot bearing 608 2

 

 

Rocker Pivot Kit & Assembly

The Edit v2 Rocker Pivot Kit contains the hardware required to rebuild your rocker pivot (excluding bearings) and is assembled as per the diagram below:

Airdrop Edit v2 Rocker Pivot Kit

# Component Specification Tool Max Torque
1 Rocker pivot bolt M6x1.0x16mm 4mm hex 11Nm
2 Rocker pivot cover 27x6.2x4.0mm n/a n/a
3 Rocker pivot axle 12xM6x68.0mm n/a n/a

 

 

BB Pivot Kit & Assembly

The Edit v3 BB Pivot Kit contains the hardware required to rebuild your BB pivot (excluding bearings) and is assembled as per the diagram below:

Airdrop Edit v2 BB Pivot Assembly

# Component Specification Tool Max Torque
4 BB pivot bolt M6x1.0x16mm 4mm hex 11Nm
5 BB pivot cover 27x6.2x4.0mm n/a n/a
6 BB pivot washer 20x12.2x3.0mm n/a n/a
7 BB pivot axle 12xM6x66.5mm n/a n/a

 

 

Chainstay Pivot Kit & Assembly

The Edit v2 Chainstay Pivot Kit contains the hardware required to rebuild your Chainstay pivot (excluding bearings) and is assembled as per the diagram below:

Airdrop Edit v2 Chainstay Pivot Assembly

Please Note: When disassembled, the seatstays must be handled with care to avoid the seatstay bridge being damaged.

# Component Specification Tool Max Torque
8 Chainstay pivot bolt M8x26mm 5mm hex 13Nm
9 Chainstay pivot washer (outer) 22x8.2x3.0mm n/a n/a
10 Chainstay pivot washer (inner) 15x8.2x3.0mm n/a n/a

 

 

Seatstay Pivot Kit & Assembly

The Edit v2 Seatstay Pivot Kit contains the hardware required to rebuild your Seatstay pivot (excluding bearings) and is assembled as per the diagram below:

Airdrop Edit v2 Seatstay Pivot Assembly

Please Note: When disassembled, the seatstays must be handled with care to avoid the seatstay bridge being damaged.

# Component Specification Tool Max Torque
11 Seatstay pivot bolt M8x28mm 5mm hex 13Nm
12 Seatstay pivot washer (outer) 22x8.2x3.0mm n/a n/a
13 Seatstay pivot washer (inner) 15x8.2x4.0mm n/a n/a

 

Shock Bolt Kit & Assembly

The Edit v2 Shock Bolt Kit contains the nuts, bolts and washers required to install your rear shock (excluding shock mounting hardware and eyelet bushings) and is assembled as per the diagram below:

Airdrop Edit v2 Shock Bolt Assembly

# Component Specification Tool Max Torque
14 Shock Mount Bolt & Washer (upper) M8x1.25x40mm 6mm hex 13Nm
15 Shock Mount Nut (upper) M8x1.25 n/a n/a
16 Shock Mount Bolt & Washer (lower) M8x1.25x40mm 6mm hex 13Nm
15 Shock Mount Nut (lower) M8x1.25 n/a n/a