by James Crossland September 20, 2017 2 Comments

James is the 'other' member of staff at Airdrop. With a background in DH and a lot of bike park laps under his tyres, his custom built Edit v2 is unique. So we thought we would kick off our new series of bike checks with a look at James' bike.

Whenever we do a particularly sweet custom build - and if we have the time - we like to put something up on the blog about it. Other customers are always keen to see what we can do with bikes and with an almost infinite array of components to choose from, we've put some sick bikes together. But what's sometimes missing is the insight into why people choose to build their bike in a certain way. So James gives us the lowdown on his bike and how it came together.

Rider

James Crossland Riding Queenstown Bikepark

Hailing from the 'happy valley' a.k.a. Stocksbridge (that's North Sheffield and definitely not Barnsley) he spends most of his ride time in Wharncliffe but has been lucky enough to live in both Whistler and Queenstown.

Age: 26
Height: 6' 2"
Weight: 85kg
Years Riding: 12 Years
Riding Background: Downhill
Riding Style: Techy steep and chundery rough stuff



Bike Spec

My bike's a bit like Trigger's broom. I ride a lot so things wear out. And now that I'm working with Ed at Airdrop, things need to be tried out & tested. But this is the spec I'm riding right now.

James Crossland's Custom Airdrop Edit v2

Frame: Airdrop Edit v2, size Large
Colour: Raw with black decals
Forks: Cane Creek Helm 160mm in limited edition blue
Rear Shock: Fox DHX2 with 450lb SLS spring
Headset: Cane Creek 40 ZS44/56
Headset Spacers: Cane Creek Interlok Composite
Headset Topcap: Cane Creek
Stem: Chromag BZA 35mm
Handlebars: Chromag BZA Carbon, 35mm rise, 800mm wide
Grips: DMR Deathgrip black, thin
Seatpost: Fox Transfer 150mm
Saddle: WTB Volt Carbon
Brakes: SRAM Guide Ultimate
Rotors: SRAM Centerline, 200mm front, 180mm rear
Wheels: Stan's Flow on Hope Pro 2 Evo rear, Hope Tech Enduro Pro 4 front
Tyres:
WTB Vigilante 27.5 tough high grip rear, WTB Convict 27.5x2.5 tough high grip front
Rear Derailleur: SRAM X01 1x11
Cassette: SRAM X01 1x11
Shifter: SRAM X01 1x11
Cranks: Truvativ Descendant Carbon
Chainring: SRAM direct-mount 32t
Pedals: Burgtec Penthouse mk4
Chain: SRAM X01
Bottom Bracket: SRAM GXP Team
Chaiguide: n/a
Total Weight 34lb / 15.4kg



Tyre Choice And Pressures

I'm a big fan of the WTB rubber! Currently running a 2.5" WTB Convict up front and a 2.3" Vigilante out back. Both tyres are the softer compounds (high grip) and I always run the tough casing. I’m not too worried about rolling speed and spend most of my time riding greasy steeper stuff so thick sidewalls and soft rubber always help. As for pressures honestly I have no idea, I give my tyres a squeeze before I head out and try not to worry about it too much, think its real easy to get sucked in to being too critical of minor details.



Fork

Cane Creek Helm fork on James' Edit v2

I've always been a coil fork guy, previous to this Cane Creek Helm I was running a Marzocchi 350 NCR Ti. Loved it, it was bulletproof however with the demise of Marzocchi and lack of spare parts was time to retire the old girls.

So out with old & in with the blue. Everyone loves a bit of blue.

I was initially attracted to the Helms due to the independent air spring setup, this meant I could set them up with a fraction more negative pressure than positive for that 'can't believe it's not butter' coil feel. 

After a few months on the Helms I'm pretty blown away. The Helms offer a lot more support than the rest of the current crop of top tier forks, they really reward being ridden hard. For me the more progressive spring curve and firmer damper setup really suit how I setup forks. I'm sure this isn't for everyone but I love it.



Shock

Fox DHX2 Coil Shock on James' Edit v2

I'm currently riding a Fox DHX2 coil spring with climb switch, good shock goes well! In all honesty I went for this shock because I wanted to try something different, it had been a while since I had owned a Fox shock so there wasn't real any better time.

I'm 5 months in with this shock now and couldn't be more stoked on it. The shock completely transformed the bike; it just hugs the ground now and offers a lot more traction somehow without losing that playful feeling.



Suspension Setup

I run a pretty imbalanced setup - firm in the front and softer out back, good for trucking!

I always run my fork real progressive, to the point that I hardly ever use full travel, hate the feeling of the front end diving. Last thing you want riding steeps. So up front super progressive but supple in the beginning stroke.

Out back a lot softer, I’ve always been a big fan of coil shocks and their more linear feel and superior small bump sensitivity (they look cool too). I’m running a 450lb spring right now but realistically would like to jump up to a 500lb. Run very little low speed compression and but a boat load of high speed to avoid harsher bottom outs. Tend to run the rebound on the quicker side too, I ride slightly off the back so faster rebound seems to keep the shock from packing down through repeated hits.



Cockpit Setup

Chromag BZA Stem on James' Edit v2

I have a massive soft spot for Chromag gear - its got bears on! I always run Chromag bars & love the sweep. I remember being pretty conscious of running carbon bars first time but really like the feel and had my previous set of BZA’s for 3 years with no issues. So it's plastic bars all round on my bike these days.

I run the front end pretty high, x3 5mm spacers, short 35mm stem and 35mm rise bars. I find having a higher front end makes it easier to pull up and as I said earlier prefer riding steeper stuff so high front end makes sense.

As for contact points, im loving the DMR Deathgrips, I have a passionate hatred for gloves so this grip works well for me. Sounds daft but really like the ribbed section somewhere nice to put your thumb. I tend to run my brake levers on flatter side but nothing too extreme and like the levers biting pretty close to the bar.



Drivetrain

SRAM X01 Drivetrain on James' Edit v2

Nothing too special here. Sram X01 1x11 and Descendant cranks. I've had this groupset for 3 years and it's never skipped a beat, still as good as the day it came out the box (I think). To be honest I want an excuse to buy Eagle but just cant kill the X0 so it's here to stay.



Brakes

SRAM Guide Ultimate brakes on James' Edit v2

Guide Ultimates. In my opinion the best brakes ever; had them 3 years like the groupset only bled them once still feel awesome. Cant say enough good stuff about these brakes. Carbon levers too stop my fingers getting cold in winter.



Flats or Clips?

Always flats for me, I like to dangle a leg off from time to time. I get clips if you're racing but for me flats are more fun. Burgtecs are always a no brainer simply because they don't go wrong. 

Details of James' Edit v2



Dropper and Saddle

150mm drop Fox Transfer performance (couldn’t afford kashima L), with 1x style remote. Super light action - goes up and down when I ask it to - not sure what else I can say. Been perched on WTB Volts for the last 5 or 6 years; this one's been on my last 3 bikes. She’s a little rough around the edges now but a great saddle.



Anything you would change? 

Probably a longer drop post, I've got pretty long legs and with a 150mm drop post I still have to use the QR clamp and drop the post in the frame to avoid being pecked in the ass. I've been eyeing up the 200mm drop 9point8 Fall Line for a while now.

And maybe some new rims. Having non-matching rims upsets me, probably something around 30mm Internal and alloy from WTB. I previously had a love affair with carbon rims but since getting back on alloy I have to say I prefer the feel. Carbon rims can fell harsh on the rough stuff. Maybe it's all in my head, but still.



Favourite Components

All of it! I'm pretty stoked on all the components to be honest.

Chromag Seat Clamp on James' Edit v2

Oh no! In fact my Chromag seat clamp. I've had it for six years and it's dreamy to open and close. At the time I remember thinking this is too much to spend on a seat clamp. But probably the best 30 quid I ever spent.



Any Secrets Or Setup Tips?

Hmmmm... always organic brake pads. Don’t be cheap! Sure they don’t last as long but who cares. I like stopping.

Also I always run 3 or 4 layers of tubeless tape, have found building up the rim with tape cuts down on burping tyres.



James Crossland
James Crossland

James grew up in Sheffield and Wharncliffe is his local. He spent the last couple of years guiding in Queenstown but now he's back, helping with all things Airdrop.


2 Responses

Alexandre Pereira
Alexandre Pereira

October 16, 2017

What a beast! :-)

Jason Collyer
Jason Collyer

September 20, 2017

Brilliant article and well written, just down to earth and honest, I have the same setup on my bike, maybe it’s a Sheffield thing ?

Leave a comment

Comments will be approved before showing up.


Also in Airdrop Bikes Blog

Mend Our Mountains: Cut Gate
Mend Our Mountains: Cut Gate

by Ed Brazier November 29, 2017

Being based in Sheffield, we're lucky to have plenty of awesome riding close at hand. Cut Gate in the Dark Peak is one of those all-time classic routes, but it's suffering a bit and we now have an opportunity to help.

Read More
Video: The Hard Way
Video: The Hard Way

by Ed Brazier November 22, 2017

The Great Glen Way (Slighe a' Ghlinne Mhòir) follows Scotland's Great Glen, running from Fort William to Inverness over 79 miles of big mountain terrain. It's generally walked from west to east to follow the direction of the prevailing wind. We teamed up with Descent World to do it the hard way...

Read More
Bike Check: Nush's Edit v2
Bike Check: Nush's Edit v2

by James Crossland November 03, 2017

Nush Lee AKA 'Nushy P' , all round shredder and conveyor of good times. We take a look at Nush's fresh custom Edit v2 and find out why she chose to build it the way she did.
Read More

News & Updates