August 04, 2022 4 min read
When we set out to design the Filter, the idea was for it to be a versatile platform; one that you could build in different ways. Every way we could think of was for it to be rowdy. Everyone at Airdrop put in a lot of time on Filters and James (bike designer) settled on a build that suits his favourite trails in Wharncliffe. And that's why we've put together this limited edition build - to take the Filter to the max.
Instead of the Pike Ultimate, the core edition amps things up with a Lyrik Ultimate, adding strength, stiffness and an extra 10mm travel. That drops the head-angle out to 64.5°. Plus they're Boxxer red which is always good. We've matched that up with a Cane Creek DBcoil IL rear shock so you get all the plushness and plenty of tuneability without a weight penalty.
As ever we've specced Burgtec finishing kit (it is the best) but we've gone with James' preference for a higher front end with the RideHigh 38mm bar. Better on the steep stuff. And that these carries through to the brakes which are Code RSC. World Cup DH brakes on a trail bike? Why not.
We've gone with the WTB Proterra Tough i30 wheelset and specced Michelin Wild Enduro tyres - Magi-X front and Gum-X rear. As always, they're set up tubeless. A suitably hardcore combo for what is undoubtedly a hardcore bike.
The Filter Core Ltd Edition is out now.
We've chosen a grey frame and silver chrome decals for this photo bike, but you can choose either grey or raw frame finish and there's the usual selection of decals.
James shredding his Filter prototype in Glassie earlier this Summer.
The Lyrik Ultimate 160mm ups the travel by 10mm and drops the head-angle out to 64.5° which is as slack as the Edit in it's stock setting. Yes they're a little heavier than the Pike, but they're also stronger and stiffer. The extra confidence you get is more than worth the tradeoff.
It's no secret that we designed the Filter to be a bike that requires a bit more rider input. You need to ride it more than some of the monster-trucks you can get these days. And that's a conscious choice because that's what makes riding bikes fun. But putting the Lyrik on means your front wheel's going to be writing cheques your rear wheel needs to cash! Hence the Cane Creek DBcoil IL. Tonnes of small bump sensitivity, good mid-stroke support and with the Filter's progressive kinematics it ramps up at the end. Tune it how you like. Flick the climb switch any time you need. And with the Valt lightweight spring there's no weight penalty.
SRAM GX Eagle 1x12 drivetrain with a 32t chainring, 170mm cranks and 10-52t cassette. All the gears.
We don't spec a chainguide on the standard Filter bikes, although the frame does have ISCG05 tabs. But on a build like this it's the right thing to do. MRP's 1x top-guide is just the job: light, simple and unobtrusive. It's one of those fit-and-forget parts.
The WTB Proterra Tough i30 is our favourite no-nonsense alloy wheelset. Again, we've gone a bit more aggressive with the tyres on this build; where the Filter Works uses Michelin Wild AM, we've gone for the Wild Enduro (Magi-X front, Gun-X rear) on the Core Ltd Edition.
The Filter Core Ltd Edition is out now.
Thanks to Callum Wood for the photo of James riding.
We are receiving lots of enquiries about these bikes which we're always happy to help with, but as they're all very similar we thought it best to publish some of the more frequently asked questions here:
How much is this build?
The Filter Core Ltd Edition is £3499.
How many will be available?
Only 10 of these ltd editions will be built.
When will it be released?
It's available to order now (while stocks last).
Can I preorder one?
There's no need; this particular build is in stock.
Can I buy it online?
Yes of course. The Filter Core Ltd Edition can be bought online here.
Can I buy it by phone?
Yes of course. Just give us a ring on 0114 2012339 (mon-fri 9am-4pm) and we'll be happy to help.
If I buy one, when will it ship?
Right now the build queue is around 7-10 working days.
Can I make changes to the spec?
No. These builds have been planned and the parts bought months in advance so it’s not possible for us to make changes.
What if I don’t manage to get one?
We’re working as hard as we can to try to build enough bikes for everyone, but as a small business it’s not always possible. If you miss out, you might want to look at the stock Filter builds.
Do you ship outside the UK?
Yes, with some limitations. The website will allow customers in the EU to buy subject to the new international taxes applicable. The website will not accept orders from outside the EU but if you contact us we can make special arrangements.
Comments will be approved before showing up.
We're always working on stuff behind the scenes, and we'd like to share some of those stories with you. Some things work out, some things don't - but it's always interesting.
Sign up to get the inside line.